PRO-9B2
31mm HEAVY DUTY DRILL
* Heavy Duty Motor – Specially desidned and dynamically balanced for vibration
free operparations.
* It can be used for production line Drilling in Heavy Engineering works, ship Yards,
Mines, Railway & Transport workshop. It can also used for Honing & Line Boring
purpose.
* With PROTON MDS-200 Magnatic Drill Stand, all these drills will convert into sturdy
drill press & also can be used for horizontal as overhead drilling.
* All ball bearing construction & easy to control Because of shed
free operparations.
* It can be used for production line Drilling in Heavy Engineering works, ship Yards,
Mines, Railway & Transport workshop. It can also used for Honing & Line Boring
purpose.
* With PROTON MDS-200 Magnatic Drill Stand, all these drills will convert into sturdy
drill press & also can be used for horizontal as overhead drilling.
* All ball bearing construction & easy to control Because of shed
Specification
| PRO-9B1 | PRO-9B2 | |
| Rated Voltage | 235 V | |
| Supply 50Hz | A.C / D.C | |
| Full Load Input | 660 watts | 850 watts |
| No Load Speed | 380 rpm | 280 rpm |
| Full Load Speed | 250 rpm | 170 rpm |
| No Load Current | 1.75 amps | 1.75 amps |
| Full Load Current | 2.85 amps | 3.8 amps |
| Duty Cycle Rating | Continuous | 15 mins. On |
| Approx Net Weight | 10.6 kgs | 10.6 kgs |
Importants
RPM Indicated is at no load.
Walt indicated at rates input.
Rated Voltage 220/240 Volts.
Rated Frequency 50 Hz. A.C/D.C.
Product pictures and illustrations are as true as possible but not binding.
In the interest of continual improvement, PROTON reserve the rights to alter its product design or change specification without prior Notice.
